Table of Contents
Advertisement
Appendix B — Reviewing Backup (Clip) Images
Disconnect the external USB-IDE hard disk drive from the DVR, and connect it to your PC.
You do not need to install any special software on your personal computer to review the video.
The backup file contains the Player program. Double-clicking the target backup file starts the
Player program.
NOTE: It is suggested that the computer used for the Player program has at least a
800MHz Pentium III. If your CPU is slower than this, backup files recorded at maximum
speed with very high image quality will be played back slowly.
Click the Save button to save the current image in a bitmap file format to the local hard disk
drive or floppy disk.
Click the Print button to print the current image on the printer connected to your computer.
The Backup File Information window displays information regarding the backup file.
Location displays the site description of the DVR where the backup was made. Record
displays the time span of the video backup file. Encryption displays whether the backup file
has been tampered with. Normal means the file has not been tampered with, Wrong means the
system has detected tampering, and no mark means the user cancelled the encryption check.
Figure 82 — Player screen.
Digital Video Recorder
77
Advertisement
Table of Contents
