Table of Contents
Advertisement
User's Manual
Change the numbers by highlighting them and using the Up and Down arrow buttons to
increase or decrease the number.
The factory default LAN settings are:
IP Address:
Gateway:
Subnet Mask: 255.255.255.0
The factory default IP Port settings are:
Admin:
Watch:
Search:
Callback:
NOTE: Do NOT use the same IP port number for two different programs, otherwise, the
DVR cannot be connected with a PC running RAS.
CAUTION: When changing the IP port settings, you must change the IP port settings on
a PC running RAS as well. Refer to the RAS manual for details.
You can save your changes and return to the Network Setup screen by highlighting OK and
button . Selecting Cancel exits the screen without saving the changes.
pressing the
Modem Setup
Highlight the box beside Use and press the
and External Modem.
56
192.168.1.129
192.168.1.254
8200
8016
10019
8201
Figure 65 — Modem Setup screen.
button. This toggles between Internal Modem
Advertisement
Table of Contents
