Figure 67 - Password Setup Screen - ADT A-ADRP4E-120 User Manual

Digital Video Recorder
Figure 67 — Password setup screen.
Highlight the box beside User and press the button to toggle between On and Off. If the
password is set to On, you will be asked to enter the current password so that you can turn it Off.
If the password is set to Off, you will be asked to enter the new password and to confirm it
before it will be turned on.
The Administrator password cannot be turned On and Off. You can change the Administrator
password by first entering the current password, entering a new password and finally
confirming the new password.
To change the password, highlight the Password box and press the
button. A window
appears asking you to enter the current password. If you enter the correct password, another
window appears asking you to enter a new password using the camera buttons. After you press
the button, another screen appears asking you to confirm the new password.
NOTE: The Admin and User passwords are composed of up to eight digits using the
camera buttons. The default User password is 1234, and Admin password is 4321.
CAUTION: Write down the new password and save it in a secure place. If the
password is forgotten, the unit must be reset using the Factory Reset Button
and all data settings will be lost.
To lock front panel buttons, highlight Key Lock On and press the button. Once the buttons
are locked, pressing any front panel button will cause a password screen to display. You will
need to enter the correct password to unlock the keys. The Key Lock password is 4231. The
Administrator password also can be used to unlock the keys.
You can save your changes by highlighting OK and pressing button . Selecting Cancel exits
the screen without saving the changes.
59