Table of Contents
Advertisement
NOTE: When selecting Weekly or Monthly, the Day of Week or Day of Month field will
display under the Period field. Select the check day or date.
Highlight the box beside Check Time, and adjust the numbers using arrow buttons.
Highlight the box beside Temperature Threshold and adjust the numbers using arrow buttons.
Set the temperature number to the hard disk drive manufacturer's specifications. If this
temperature is ever exceeded, the S.M.A.R.T. Alert message will display.
Highlight the box beside Sensor Unit and select from Celsius or Fahrenheit.
You can save your changes by highlighting OK and pressing the
exits the screen without saving the changes.
System Log Screen
Highlight System Log in the
appears.
The System Log screen displays a record of various events logged by the DVR. The list shows
the dates and times the system was turned ON and OFF, power failed, recording was started or
stopped, playback was started or stopped, setup changes were made, and data banks were
cleared.
The events are listed from the most recent to the oldest. You can scroll through the list a page at
a time by selecting the Up and Down arrow buttons and pressing the
directly to an event number by highlighting the event number box (left of the UP arrow),
pressing the
button, using the arrow buttons to change the number, and pressing the
button.
Main
menu and press the
Figure 35 — System Log screen.
Digital Video Recorder
button. Selecting Cancel
button . The System Log screen
button. You can go
27
Advertisement
Table of Contents
