Password Setup Screen - ADT A-ADRP4E-120 User Manual

Digital video recorders

Hide thumbs

Table Of Contents

Table of Contents

User's Manual

Callback Center Setup by LAN connections

Highlight the box beside IP Address and enter the IP address of the computer you want

contacted during an event.

Highlight the box beside Retry and enter the number of times you would like the DVR to try

contacting the computer. You can select from 1 to 10 retrys.

Callback Center Setup by Modem connections

Highlight the box beside Device and press the

button. Select Internal Modem, External

Modem or None from a drop-down menu.

Highlight the box beside Pager Number and enter the telephone number of the pager. Enter

the number as it must be dialed from your telephone system; e.g., if you must dial "9" for an

outside line, enter "9" before the pager number.

Highlight the box beside Mailbox and enter the voice mailbox number if your pager uses a

voice mailbox.

Highlight the box beside Site ID and enter a three-digit site ID number.

When an event occurs, the DVR will dial the pager and leave a four-digit number. The first

three digits are the site ID number and the last digit is the type of event (1: Alarm In, 2: Motion

Detection, 3: Video Loss and 10: Storage). For example, "0753" means that Site 75 has lost

video.

NOTE: The DVR will wait for at least four minutes between pages. If another event

occurs less than four minute after the DVR has notified a pager, it will not dial the pager.

It does this so that the telephone line will not be tied up.

You can save your changes by highlighting OK and pressing the

button . Selecting Cancel

exits the screen without saving the changes.