Table of Contents
Advertisement
Digital Video Recorder
Highlight Baud Rate and press the
button. A list of baud rates ranging from 300 to 115,200
appears.
Highlight the box beside Data Bit and press the
button. This toggles between 7 bit and 8 bit
formats.
Highlight the box beside Stop Bit and press the
button. This toggles between 1 and 2 Stop
Bits.
Highlight the box beside Parity and press the
button. A drop-down list appears. You can
select from None, Odd or Even parity.
You can save your changes by highlighting OK and pressing the
button . Selecting Cancel
exits the screen without saving the changes.
NOTE: An internal modem may have compatibility problem with the modem used for the
RAS (Remote Administration System). Please contact your dealer/installer for available
models for the RAS.
Callback Center Setup Screen
Figure 66 — Callback Center Setup screen.
The DVR can be set up to contact a computer running RAS (Remote Administration System) on
a LAN when an event occurs. Also it can be set up to dial a pager with a numeric message when
an event occurs if you have a modem connected to the DVR.
NOTE: When the DVR is networked with LAN connections, you can set up the callback
center by both LAN connections and modem connections.
57
Advertisement
Table of Contents
