Table of Contents
Advertisement
Highlight the box beside Event Monitoring and press the
Off. When On, video from the lowest camera number among those associated with the
event-detected sensor will be displayed full-screen on the monitor for the preset dwell time.
Highlight the box beside Event Monitoring Dwell Time and press the
adjust the event monitoring dwell time from 3 to 60 seconds.
Spot Monitoring Setup Screen
You can adjust the display dwell time for each camera displayed on the spot monitor. You can
also turn event monitoring on and off.
Highlight the box beside Sequence Dwell Time and press the
sequence dwell time from 3 to 60 seconds.
Highlight the box beside Event Monitoring and press the
Off. When it is On, the video of the lowest camera number among cameras associated with the
event-detected sensor will be displayed in full-screen on the spot monitor during the preset
dwell time.
Highlight the box beside Event Monitoring Dwell Time and press the
adjust the event monitoring dwell time from 3 to 60 seconds.
Figure 62 — Spot Monitoring Setup screen.
Digital Video Recorder
button to toggle between On and
button. You can
button. You can adjust the
button to toggle between On and
button. You can
53
Advertisement
Table of Contents
