Figure 21 Lan (Manual) Setup Screen - ADT 4-Channel User Manual

User's Manual
Figure 21 LAN (Manual) setup screen.
NOTE: You will need to get the appropriate IP Address, Gateway and Subnet Mask from your
network administrator.
Highlight the box beside DNS Server. Press the Up and Down arrow buttons to set the IP
address of the DNS server.
Highlight Use UPnP and press the
forwarding from the NAT (Network Address Translation) device to the DVR will be enabled
automatically via UPnP (Universal Plug and Play) service. This function will be especially useful
when accessing a port on a private IP address.
NOTE: For the UPnP service to work, the NAT device should support the UPnP Port
Forwarding function and the function should be set to enabled.
NOTE: You cannot change the port settings when Use UPnP is On.
Highlight the Status box and press the
NAT device via UPnP service.
Highlight the Port Number Setup... box and press the
screen appears.
NOTE: You will need to get the appropriate Port Numbers for each RAS and WebGuard
related program (Admin, Callback, Watch and Search) from your network administrator.
NOTE: Do NOT use the same port number for two different programs, otherwise, the DVR
cannot be connected with the PC running RAS or WebGuard.
26
Highlight the box beside Type and press the
configuration from: Manual, DHCP and ADSL
(with PPPoE). Select the desired type and press
the
Selecting Manual from the Type allows you to
set up LAN parameters manually.
Change the numbers by highlighting them and
using the Up and Down arrow buttons to
increase or decrease the number. The factory
default LAN settings are:
button to toggle between On and Off. When it is On, port
button to display the port numbers forwarded from the
Change the numbers by highlighting them and using the Up and
Down arrow buttons to increase or decrease the number. The
factory default Port settings are:
Remote Admin:
Remote Callback:
Remote Watch:
Remote Search:
button. You can select the type of network
button.
IP Address: 192.168.1.229
Gateway: 192.168.1.1
Subnet Mask: 255.255.255.0
button. The Port Number Setup
8200
8201
8016
10019