Table of Contents
Advertisement
Turning on the Power
Connecting the power cord to the DVR turns on the unit. The unit will take approximately 60
seconds to initialize.
Review of Front Panel Display
The key icon displays when the unit is in the Key Lock mode.
The circle with the broken line displays whenever the system was not properly shut down
such as a power failure.
The clock icon displays when any camera is in the time-lapse mode.
REC displays while the unit is recording.
MENU displays when the DVR is in Menu mode.
CLOCK displays when the digits are displaying the current time.
PB displays when video is being played back and the digits are displaying the time of the
recording.
REMAIN displays when the digits are displaying the remaining hard disk drive
capacity.
ALARM displays when any camera is in the event-driven recording mode.
The bell icon displays during alarm activation.
These light when the display is in the remaining disk capacity mode. TB = TeraBytes,
GB = GigaBytes and MB = MegaBytes.
This icon displays when video is being played backward at fast speed.
This icon displays when video is being played backward at regular speed.
This icon displays when video is paused.
This icon displays when video is being played forward at regular speed.
This icon displays when video is being played forward at fast speed.
The network icon displays when the unit is networked either via Ethernet or modem.
DX displays when the DVR is operating in the Duplex mode.
The disk icon displays when data is being backed up.
Figure 21 — Front panel display.
Digital Video Recorder
15
Advertisement
Table of Contents
