Table of Contents
Advertisement
User's Manual
The DVR provides the Duplex mode, so you can record and play back video at the same time.
Highlight the box beside Field Detect. Pressing the
button toggles between On and Off.
When set to On, the Field Detection helps prevent shaking. It does this by recording odd
numbered fields from odd numbered cameras and even numbered fields from even numbered
cameras.
Highlight the first box beside Auto Deletion. Pressing the
button toggles between On and
Off. When set to On, the DVR will delete video recorded earlier than user-defined period.
Highlight the second box beside Auto Deletion, and press the
button to select the length of
time recorded data will be kept from 1 to 99 Days.
You can save your changes by highlighting OK and pressing the
button . Selecting Cancel
exits the screen without saving the changes.
Time-Lapse Record Mode Setup Screen
Figure 48 — Time-Lapse Record Setup screen.
Highlight the box under the Speed heading and press the
button. A drop-down list of record
speeds appears. You can select from 1 image per 10 seconds to 60 images per second for NTSC
(to 50 images per second PAL).
Highlight the box under the Quality heading and press the
button. A drop-down list appears.
You can select from Very High, High, Standard and Low image quality. All other variables
being equal; Very High will require 600% more hard disk space than Standard, High will
require 250% more, and Low 30% less.
NOTE: Higher quality images require more storage space and will reduce the recording
capacity of the hard disk drive.
38
Advertisement
Table of Contents
