Port No - Konica Minolta bizhub C450 Network Scanner Operations

3

Port no.

Specify the port number that other systems access using IS OpenAPI (initial
port number: 50001, initial port number (SSL): 50003).
1
In the administrator setting screen, touch [8 System Connection]. (Re-
fer to page 3-7 for more details.)
2
In the System Connection screen, touch [1 IS OpenAPI Setting].
3
In the IS OpenAPI Setting screen, touch [Port No.].
The IS OpenAPI Port Setting screen appears.
4
Touch [Input] for the desired item.
5
Press the [C] (clear) key to erase the value, and then use the keypad to
type in the value (between 1 and 65535).
– If a value outside of the allowable range is specified, the message
"Input Error" appears. Type in a value within the allowable range.
6
Touch [OK].
– To cancel changes to the setting, touch [Cancel].
The port number that other systems access using IS OpenAPI is set.
3-112
Specifying settings from the control panel
C450