Konica Minolta bizhub C450 Network Scanner Operations page 58

2
4
Touch [Scan Settings], and then specify the scan settings.
– For details on the scan settings, refer to "Specifying the scan set-
tings" on page 2-46.
5
After specifying the settings, touch [OK].
6
Load the document into the ADF or position it on the original glass of
the machine.
7
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
Note
Do not turn off the machine until the scanned jobs disappear from the job
list.
2-20
Scanning documents
C450