Status Notification Settings; Status Notification Parameters; To Specify Status Notification Settings - Konica Minolta bizhub C450 Network Scanner Operations

3
3.21

Status notification settings

Settings for notifying the administrator of the machine's status by e-mail can
be specified. The status notification is sent if the e-mail address is entered
and if any of the notification conditions are selected.

Status notification parameters

The status notification parameters are as follows:
Item
Notification Address Setting
Notification Item Setting
Notification Time Setting

To specify status notification settings

1
In the administrator setting screen, touch [5 Network Setting]. (Refer to
page 3-7 for more details.)
2
In the Network Setting screen, touch [9 Detail Setting].
3
In the Detail Setting screen, touch [3 Status Notification Setting].
– To quit specifying the utility mode setting, touch [Exit] in the sub
display area. Otherwise, cancel the utility mode by touching [Close]
in each screen until the screen for the Copy, Fax, Scan or Box mode
appears.
– Refer to "E-mail TX (SMTP) parameters" on page 3-77 for more de-
tails.
The Status Notification Setting screen appears.
3-96
Specifying settings from the control panel
Description
Sets the e-mail address where notification of the machine's
status is to be sent. Use the keyboard that appears in the
touch panel to type in the e-mail address (up to 320
characters).
Sets the conditions under which notification of the ma-
chine's status is to be sent by email. For details on specify-
ing the settings, refer to "Notification item setting" on
page 3-97.
Sets the time when notification of the machine's status is to
be sent. To change the value, press the [C] (clear) key, and
then use the keypad to type in the value (between 1 and 10
minutes).
C450