E-Mail Rx (Pop) Settings; E-Mail Rx (Pop) Parameters - Konica Minolta bizhub C450 Network Scanner Operations

3
3.18

E-mail RX (POP) settings

These settings are specified when performing SMTP authentication.

E-Mail RX (POP) parameters

The e-mail RX (POP) parameters are as follows:
E-mail RX (POP) screen
Item
E-Mail RX Setting
POP Server Address
Login Name
Password
POP detail screen
Item
APOP Authentication
Port No.
Connection Timeout
3-86
Specifying settings from the control panel
Description
Sets whether to turn on the e-mail reception.
Sets the POP server address used to receive e-mail.
For details on specifying the settings, refer to "POP server
address" on page 3-89.
Sets the login name used to connect to the POP server.
Use the keyboard that appears in the touch panel to type in
the login name (up to 63 characters).
Sets the password used to connect to the POP server. Use
the keyboard that appears in the touch panel to type in the
password (up to 15 characters).
Description
Sets whether to turn on authentication.
Set the port number used to communicate with the POP
server. To change the value, press the [C] (clear) key, and
then use the keypad to type in the value (between 1 and
65535).
If the operation delays while receiving mail from the POP
server, mail reception is automatically aborted after a
specified time elapses. Set the time from the point when
the reception stops to the point when the mail reception is
to be aborted. To change the value, press the [C] (clear)
key, and then use the keypad to type in the value (between
30 and 300 seconds).
C450