Twain Lock Time - Konica Minolta bizhub C450 Network Scanner Operations

Specifying settings from the control panel

TWAIN lock time

The machine's operation lock time of the control panel during scanning (ex-
cluding PUSH scan) can be specified (initial value: 120 seconds).
1
In the utility setting screen, touch [5 Scanner Setting].
– To display the utility setting screen, refer to page 3-6.
2
Touch [TWAIN Lock Time].
3
Press the [C] (clear) key to erase the value, and then use the keypad to
type in a time period (between 30 and 300 seconds).
– If a value outside of the allowable range is specified, the message
"Input Error" appears. Type in a value within the allowable range.
4
Touch [OK].
The TWAIN lock time is set.
C450
3
3-39