Time Adjustment Settings; Time Adjustment Parameters; To Specify Time Adjustment Settings - Konica Minolta bizhub C450 Network Scanner Operations

3
3.20

Time adjustment settings

The machine's internal clock can be corrected via the network.

Time adjustment parameters

The time adjustment parameters are as follows:
Item
NTP Setting
NTP Server Address
Port No.
After specifying this setting, touch [1 System Setting] in the Administrator
Setting, touch [3 Date/Time Setting], and then set the date.
Periodic automatic adjustment is not performed.

To specify time adjustment settings

1
In the administrator setting screen, touch [5 Network Setting]. (Refer to
page 3-7 for more details.)
2
In the Network Setting screen, touch [9 Detail Setting].
3
In the Detail Setting screen, touch [2 Time Adjustment Setting].
The Time Adjustment Setting screen appears.
4
Specify the desired settings.
3-92
Specifying settings from the control panel
Description
Specify whether to turn on the NTP.
Sets the IP address of the NTP server. For details on spec-
ifying the settings, refer to "NTP server address" on
page 3-94.
Set the port number used to communicate with the NTP
server. To change the value, press the [C] (clear) key, and
then use the keypad to type in the value (between 1 and
65535).
C450