Konica Minolta bizhub C450 Network Scanner Operations page 288

Specifying settings using PageScope Web Connection
Item
LDAP
LDAP Server Address
Port Number
Enable SSL/Port Number
Search Base
Search Timeout
Max # of LDAP Hits
Authentication Method
Login Name
Password
Domain Name
C450
Description
Enables/disables LDAP.
Enter the LDAP server address (syntax: "***.***.***.***" or
FQDN where the input range of *** is 0 to 255).
Enter the port number used to communicate with the LDAP
server (input range: 1 to 65535).
Specify whether to perform communications with the LDAP
server using SSL/TLS.
Enter the search start point of the LDAP search (up to 255
characters).
Enter the LDAP search timeout (input range: 5 to 300
seconds).
Enter the maximum number of hits to be received as the LDAP
search result (input range: 5 to 1000).
Set the LDAP authentication method.
Enter the login name if authentication is not set to
"anonymous" (up to 255 characters).
Enter the password if authentication is not set to
"anonymous" (up to 128 characters).
Enter the domain name if authentication is set to "Active
Directory" (up to 64 characters).
4
4-51