Tcp/Ip Settings; Before Specifying The Settings; Items To Be Specified - Konica Minolta bizhub C450 Network Scanner Operations

Specifying settings from the control panel
3.9

TCP/IP settings

The settings for using the machine on a TCP/IP network can be specified.
To activate all network setting changes, turn the main power off and then
back on.

Before specifying the settings

When specifying TCP/IP settings, note the following points.
- If "DHCP Setting" is set to "ON", "IP Address", "Subnet Mask", and "De-
fault Gateway" are not available.
- When a DHCP server is used, the IP address, subnet mask, and default
gateway are assigned from the DHCP server. Therefore, there is no need
to specify these settings manually. However, note the following points.
- Check with your network administrator that the DHCP server is available.
If a DHCP server is not available, be sure to specify settings for "IP Ad-
dress", "Subnet Mask", and "Default Gateway".
- If the IP address and other settings are assigned by the DHCP server,
they may automatically be changed. If this happens, there is a possibility
that the machine on the network can no longer be specified using the IP
address. If "DHCP Setting" is set to "ON", it is recommended that the IP
address assigned to the machine be fixed by configuring the DHCP serv-
er.

Items to be specified

The following items are specified.
TCP/IP setting screen 1/3
Item
TCP/IP Setting
DHCP Setting
IP Address
Subnet Mask
Default Gateway
C450
Description
Specify whether to turn on the TCP/IP settings.
Specify whether to use DHCP.
Set the machine's IP address. Use the keypad to type in the
address.
Set the subnet mask of the network to which the machine
is to be connected. Use the keypad to type in the address.
Set the default gateway of the network to which the ma-
chine is to be connected.
3
3-41