Specifying settings from the control panel
3.26
SNMP settings
SNMP settings can be specified.
SNMP parameters
The SNMP parameters are as follows:
Item
SNMP Setting
Read Community Name
Write Community Name
To specify SNMP settings
1
In the administrator setting screen, touch [5 Network Setting]. (Refer to
page 3-7 for more details.)
2
In the Network Setting screen, touch [9 Detail Setting].
3
In the detail setting screen, touch [8 SNMP Setting].
The SNMP setting screen appears.
4
Specify the desired settings.
5
Touch [OK].
The SNMP is set.
C450
Description
Specify whether to use SNMP.
Sets the Read Community Name. Use the keyboard that
appears in the touch panel to type in the read community
name.
Sets the Write Community Name. Use the keyboard that
appears in the touch panel to type in the write community
name.
3
3-105