Sending Data In An E-Mail Message (Scan To E-Mail); Scan To E-Mail; Using Programs - Konica Minolta bizhub C450 Network Scanner Operations

2
2.3

Sending data in an e-mail message (scan to e-mail)

Scan to e-mail

The scan to e-mail operation is used to send images scanned on this ma-
chine to an e-mail address as an attachment.
The methods described below are available for specifying the destination.
The methods can also be combined, for example, by selecting a group des-
tination, then adding other destinations through direct input.

Using programs

"Program" refers to a set of destination addresses and scan settings that are
registered together. This feature is convenient for frequently scanning docu-
ments and sending data under the same conditions. The following procedure
describes how to send data by selecting a program that has been registered
in advance.
For details on registering programs, refer to "Registering program destina-
tions" on page 3-25.
1
Press the [Scan] key on the control
panel.
The scan mode screen appears.
2-8
Scanning documents
C450