Checking The Settings; To Check A Job - Konica Minolta bizhub C450 Network Scanner Operations

2
2.7

Checking the settings

Checking the settings
The selected setting can be checked in detail. The destination can be
changed on this screen.
The settings that can be viewed and changed are as follows:
Item
Type
Name
Dest.
Edit
Set Destination
Save in Add. Book
The notification destination cannot be specified when using Scan to E-mail.

To check a job

1
Press the [Mode Check] key in the
control panel while the scan mode
screen is displayed.
The check job details screen ap-
pears.
2-70
Description
Displays the type of transmission.
Displays the registered destination name.
Displays the destination file path or the e-mail address.
Touch to change the destination.
Specify the notification destination for the e-mail message
that is sent when the data is transmitted, etc.
Touch when the address is not registered in the address book
such as when the address is entered through direct input.
Scanning documents
C450