Verify The Ldap Settings - Xerox 4250 - WorkCentre - Copier System Administration Manual

•
The [Search Name Order] option will help control the returns by allowing the LDAP
query to be on Common Name or Surname. Lotus Domino will typically require a
setting of Surname to allow returns of "lastname, firstname".
•
•
•
15. Click on the [Apply] button to accept the changes.
If prompted, enter the Administrator's User ID [admin] and Password [1111], and
click on [Login].

Verify the LDAP Settings

1. Touch the [E-mail] button on Services Home screen.
NOTE:
2. Touch the [New Recipients:] button.
3. Enter a name which corresponds with an entry in your company's e-mail address list,
using the keyboard touch screen, for example: lastname, firstname.
4. Touch [Search]. The Search Results screen will appear.
5. Select the required name from the [Company List] if necessary.
6. Touch [Close] to select the name as a recipient for your e-mail.
7. Touch [Done]. The address will appear in the [Address List].
8. Place a document in the document handler and press the green <Start> button.
9. Verify that the recipient receives the scanned document in their e-mail inbox.
Xerox WorkCentre 4250/4260 Series System Administration Guide
[Search Name Order] offers 3 ways to search the address list depending on the
name syntax used in your environment:
• [Common Name] - Names are listed by First Name then Last Name.
• [Email Address] - Names are listed by E-mail address.
• [Surname and Given Name] - Names are listed by Surname then
Given Name.
NOTE: [Surname and Given Name] is the default.
Maximum Number of Search Results (between 0, 5-100) - this is the maximum
number of addresses that will appear which match the search criteria selected by
the user. Set the search results to one less than the server will allow. For example,
if the LDAP server limit is 75, set the search results to 74 or less. A zero value will
attempt to return all searches.
Search Timeout - there are two options. You can let the server use its timeout
limit by selecting the [Wait LDAP Server Limit], or specify how many seconds
the search should last (between 5 and 100). If the search takes longer than the
time specified in the [Wait... seconds] box the user will be notified that the
search failed.
LDAP Referrals: if the primary LDAP server is connected to additional servers,
select LDAP referrals to have the search include those servers.
It may be necessary to press the <Services Home> button first.
LDAP Configuration
83