Ldap; Configuring Ldap/Ldaps Server Settings - Xerox WorkCentre 6400S System Administrator Manual

LDAP

Lightweight Directory Access Protocol (LDAP) is a protocol used to process queries and updates to an
information directory, also known as an LDAP directory, stored on an external server. LDAP directories
are heavily optimized for read performance. Use this page to define how the printer retrieves user
information from an LDAP directory.

Configuring LDAP/LDAPS Server Settings

Note: If your printer is locked, you must log in as a system administrator. For details, see
CentreWare IS on page 17.
1. In CentreWare IS, click Properties > Connectivity > Protocols > LDAP.
2. Under Server Information, select the preferred address type. Options are IPv4, IPv6, or Host
Name.
3. Type the appropriately formatted Primary and Alternate LDAP Server addresses and port
numbers for the selected address type. The default port number is 389.
4. Select the LDAP server type from the LDAP Server drop-down menu.
Optional Information
1. Type the search directory root path in the Search Directory Root field using Base DN format.
• For more detail on Base DN formatting, refer to the RFC 2849 - LDAP Data Interchange
Format (LDIF) Technical Specification on the IETF website.
2. Specify the login credentials required to access the LDAP directory. Options are:
• None: No authentication occurs when users access LDAP.
• Authenticated User: The user's credentials, upon logging in, are used to access the SMTP
server.
Note: Authentication must be enabled and Tools and Features Access must be configured to
require the user to log in before accessing email. For detail on these topics, see
Rights on page 54 and
• System: The printer logs into the LDAP directory and is authenticated using its own login
credentials.
3. After you select the Login Credential type, type the Login Name and Password, if required.
4. Retype the password and select Save Password, if needed.
5. If SSL is desired, select Enable SSL under SSL.
6. If SSL is selected, click View Trusted SSL Certificates to view any secure certificates that have
been uploaded to the printer.
Note: If the LDAP Server is operating with encryption enabled, you need the certificate from that
server's certificate authority installed on the printer.
7. Under Maximum Number of Search Results, type a number between 5 and 100 for the
maximum number of addresses that can be returned matching the search criteria entered. The
default number is 25.
Controlling Access to Tools and Features
Network Configuration
Setting up Access
on page 61.
WorkCentre 6400 Multifunction Printer
System Administrator Guide
Accessing
37