3.6 AVPP Configuration Menu
3.6.1 NetLink SVP-II System
When you connect via the serial port for the first time the following main menu is displayed. Once a name for the AVPP
has been entered, on subsequent accesses a screen confirming the name and IP address of the unit is displayed until
Enter is pressed.
System Status
·
43
Menu for viewing error messages, status of operation and software code version. You can check the version currently
installed on AVPP through the System Status menu, see
SVP-II Configuration
·
Allows you to set the mode and reset the system.
QoS Configuration
·
This sub-menu of the SVP-II Configuration menu is used to alter the QoS settings applied to different signals.
Network Configuration
·
Allows you to set network configuration options, including IP address and hostname.
Change Password
·
Allows you to change the password for AVPP access.
3600 Installation
IP Office
34
36
37
38
AVPP Installation and Configuration: AVPP Maintenance
Software Versions
.
43
15-601082 Issue 05b (23 September 2008)
Page 33