Table of Contents
Advertisement
The AVPP Front Panel
The AVPP's front panel contains ports to connect to the LAN, and an administrative computer via an RS-232 port. Status
LED's supply information about the AVPP's functionality.
RS-232 Port
·
Male DB-9 connector (DTE) used for RS-232 connection to a terminal, terminal emulator, or modem for system
administration.
Link LED's
·
LNKOK – Link OK: Lit when there is a network connection.
·
ACT – Activity: Lit if there is system activity.
·
COL – Collision: Lit if there are network collisions.
·
NETWORK
·
Connects to wired (Ethernet) LAN. The AVPP auto-negotiates to the type of port on the Ethernet switch and supports
10Base-T, 100Base-T, full-duplex and half-duplex port types.
ERROR LED
·
Lit when the system has detected an error.
STATUS LED's
·
Indicate system error messages and status.
1 – heartbeat, indicates gateway is running.
·
2 – if active calls.
·
3, 4, 5 – currently unused.
·
PWR
·
Power jack for connection to the AC adapter supplying power to the system. Only use the Avaya-provided Class II
AC Adapter with output 24VDC, 1A.
Multiple AVPP100 Capacity
The following table shows the capacity of the AVPP100. Note that these are the limitations are for AVPP100's only. Each
IP Office model has its own limitations for the maximum number of supporting extensions. For example, IP Office 412
does not support more than 360 extensions.
Number of
AVPP100s
1
2
3
4
5
6
7
8
3600 Installation
IP Office
Maximum Calls
Total
per AVPP
Calls
80
80
64
128
60
180
58
232
57
285
56
336
56
392
55
440
Number of
Maximum Calls
AVPP100s
per AVPP
9
55
10
55
11
55
12
54
13
54
14
54
15
54
16
54
15-601082 Issue 05b (23 September 2008)
Total Calls
495
550
605
648
702
756
810
864
Page 10
Advertisement
Table of Contents
