Planet VDR-300NU User Manual page 98

Clients Isolation
Disable WMM
Advertise
Enable Wireless
Multicast
Forwarding (WMF)
SSID
BSSID
Country
Max Clients
Wireless
After finishing setting, click Apply/Save to save the basic wireless settings and make the settings take
effect.
scanning.
When many clients connect to the same access point, they can access
each other. If you want to disable the access between the clients that
connect to the same access point, you can select this option.
After enabling this option, the transmission performance multimedia of
the voice and video data can be improved.
After enabling this option, the transmission quality of video service
such as IPTV can be improved.
For the security reason, you should change the default SSID to a
unique name.
Display the MAC address of the wireless interface.
The name of the country with which your gateway is configured. This
parameter further specifies your wireless connection. For example, the
channel will adjust according to nations to adapt to each nation's
frequency provision.
Specify the maximum wireless client stations to be enabled to link with
AP. Once the clients exceed the max value, all other clients are
refused. The value of maximum clients is 16.
Guest/Virtual Access Points: If you want to make Guest/Virtual network
function be available, you have to check those boxes in the table
below. In the current software version, three virtual access points can
be configured.
98
User Manual of VDR-300NU