Planet VDR-300NU User Manual page 19

Front Panel LED Definition
LED Color
Green
PWR
Red
DSL
Green
Internet Green
Red
Green
LAN1-4
WLAN
Green
WPS
Green
USB
Green
Figure 2-2 VDR-300NU LED
State
ON When the router is powered on, and in ready state.
Flashing The software is upgrading.
OFF The device is powered off.
ON The device is initiating.
Flashing The software is upgrading.
ON The VDSL2 is connected successfully.
Router is trying to establish a VDSL2 connection to VDSL2
Flashing
device or telecom's network.
OFF The device is powered off.
ON Internet is synchronized successfully in the route mode.
Flashing Internet data is being transmitted.
OFF Ethernet interface is disconnected.
ON Authentication has failed.
ON The Ethernet interface is connected.
Data is being transmitted or received via the corresponding
Flashing
LAN port.
OFF The Ethernet interface is disconnected.
ON WLAN is enabled.
Flashing Data is being transmitted through the wireless interface.
OFF WLAN is disabled.
ON Connection succeeds under Wi-Fi Protected Setup.
Flashing Negotiation is in progress under Wi-Fi Protected Setup.
OFF Wi-Fi Protected Setup is disabled.
ON The connection of 3G or USB device has established.
Flashing Data is being transmitted.
OFF No signal is detected.
Table 2-1 The LED indication of VDR-300NU
19
User Manual of VDR-300NU
Description