Authentication
WEP Encryption
Encryption Strength
Current Network Key
Network Key1/2/3/4
Shared Mode
For the parameters' description of shared mode, please refer to the Open Mode.
802.1x
Enable or disable WEP encryption. After enabling this function, you
can set the encryption strength, current network key, and network
keys.
You can set 64-bit or 128-bit key.
The current key that you use.
Set the network key. If it is 128-bit key, you need to enter 13 ASCII
characters or 26 hexadecimal digits. For the 64-bit key, you need to
enter 5 ASCII characters or 10 hexadecimal digits.
Figure 5-3-7
102
User Manual of VDR-300NU