Planet VDR-300NU User Manual page 65

On this page, you may add or remove an entry of port triggering. Click the Add button to display the
following page.
Object
Use Interface
Select an
application
Custom application
Trigger port Start
Trigger port End
Trigger Protocol
Open Port Start
Open Port End
Open Protocol
Figure 5-2-46
Description
Select an interface that you want to configure
Select a proper application in the drop-down list.
Enter a new service name to establish a user service type.
The start port number that LAN uses to trigger the open port.
The end port number that LAN uses to trigger the open port.
Select the application protocol. You may select TCP/UDP, TCP, or
UDP.
The start port number that is opened to WAN.
The end port number that is opened to WAN.
Select the proper protocol that is opened to WAN. You may select
TCP/UDP, TCP, or UDP.
65
User Manual of VDR-300NU