Click Add Firewall and the following page appears.
Object
name
interface
type
defaultaction
Click Modify Firewall or Remove Firewall to modify or remove the firewall. And click Modify Rule or
Remove Rule to modify or remove the rule.
MAC Filtering Setup
In some cases, you may want to manage Layer2 MAC address to block or permit a computer within the
home network. When you enable MAC filter rules, the DSL router serves as a firewall that works at layer 2.
MAC filtering is only effective on ATM PVCs configured in bridge mode.
Figure 5-2-48
Figure 5-2-49
Description
The name of firewall.
You can select LAN or WAN from the drop-down list.
You can select IN or OUT from the drop-down list.
You can select Permit or Drop from the drop-down list.
67
User Manual of VDR-300NU