Page 2
Table of Contents 1. BEFORE STARTING UP .................. 3 2. QUICK INSTALLATION .................. 5 Further Information ..................7...
Page 3
1. BEFORE STARTING UP This is a step-by-step instruction on how to start up the VRT-420N and get connected to the Internet. 1. Setup your network as shown in the setup diagram below. ADSL Internet Power Adapter 5V 2A 2. Then, you need to setup your LAN PC clients so that it can obtain an IP address automatically.
Page 4
3. Once your PC has obtained an IP address from your router, enter the default IP address 192.168.0.1 into your PC’s web browser and press <enter>. That is, key in http://192.168.0.1 to the browser’s address field. Default IP Address: 192.168.0.1 4.
2. QUICK INSTALLATION This section intends to help you setup the VRT-420N as fast as possible. The setup includes setup, and different type of Internet connection. For more information about the settings, please also refer to the user’s manual in the CD-ROM.
Page 6
Step 3 Wireless Settings In this section you have to set VRT-420N’s Wireless SSID (see screen below).
If you still have any problem on connecting, please check user’s manual on the bundled CD for detail configuration. If you have any other questions, please contact the dealer where you purchased this product or you can contact PLANET directly at the following email address: support@planet.com.tw...