Planet VDR-300NU User Manual page 61

DHCP Server
Edit DHCP
Option60
Edit DHCP option
DHCP Advance
setup
Add Entries
Remove Entries
Configuring the
Second IP
Address and
Subnet Mask for a
LAN Interface
IPv6 Auto-configuration

Click Advanced Setup > LAN >IPv6 Autoconfig and the following page appears.
Disable DHCP Server: If the DHCP server is disabled, you need to
manually set the start IP address, end IP address and the lease time
for the clients in the LAN.
Enable DHCP Server: If you enable the DHCP sever, the clients will
automatically acquire the IP address from the DHCP server.
You can add, edit or delete the DHCP60 options.
You can add, edit or delete the DHCP options, and these options will
be sent to the DHCP client.
You can enable or disable DHCP for every LAN interface.
Enter the MAC address of the LAN host and the static IP address that
is reserved for the host
Remove the entries you set.
After enabling Configure the second IP Address and Subnet Mask for
LAN interface, enter an IP address and a subnet mask for the LAN
interface.
Figure 5-2-42
61
User Manual of VDR-300NU