This page allows you to configure the wireless bridge features of the wireless LAN interface.
Object
AP mode
Bridge Restrict
Remote Bridges
MAC Address
After finishing setting, click the Apply/Save button to save and apply the settings.
5.3.5 Advanced Settings
Choose Wireless > Advanced to display the following page. This page allows you to configure the
advanced features of the wireless LAN interface. Usually, you do not need to change the settings on this
page.
Object
Band
Description
You may select Access Point or Wireless Bridge.
Enable or disable the bridge restrict function.
Enter the remote bridge MAC address.
Figure 5-3-18
Description
You can select 2.4GHz or 5GHz.
110
User Manual of VDR-300NU