Planet VDR-300NU User Manual page 50

Object
PPP Username
PPP Password
Authentication Method
Enable Fullcone NAT
Dial on demand
(with idle timeout timer)
Enable IPv4 for this
service
Use Static IPv4 Address
Figure 5-2-26
Description
The correct user name provided by your ISP.
The correct password provided by your ISP.
The value can be AUTO, PAP, CHAP, or MSCHAP. Usually, you can
select AUTO.
NAT is one where all requests from the same internal IP address and
port are mapped to the same external IP address and port.
Furthermore, any external host can send a packet to the internal host,
by sending a packet to the mapped external address.
If this function is enabled, you need to enter the idle timeout time.
Within the preset minutes, if the modem does not detect the flow of the
user continuously, the modem automatically stops the PPPoA
connection. Once it detects the flow (like access to a webpage), the
modem restarts the PPPoA dialup. If this function is disabled, the
modem performs PPPoA dial-up all the time. The PPPoA connnection
does not stop, unless the modem is powered off and DSLAM or uplink
equipment is abnormal.
Enable this function, you can use Static IPv4 service.
If this function is disabled, the modem obtains an IP address assigned
50
User Manual of VDR-300NU