Planet VDR-300NU User Manual page 62

On this page, you can set an IP address for the DSL IPv6 router, enable the DHCPv6 server, enable
RADVD and enable the MLD snooping function.
Object
DHCPv6 Server
Enable RADVD
Enable MLD
Snooping
After finishing setting, click the Save/Apply button to apply the settings.
Description
WIDE-DHCPv6 is an open-source implementation of dynamic host
configuration protocol for IPv6 (DHCPv6) originally developed by the
KAME project. The implementation mainly complies with the following
standards: RFC3315, RFC3319, RFC3633, RFC3646, RFC4075, RFC
4272 etc.
The router advertisement daemon (RADVD) is run by Linux or BSD
systems acting as IPv6 routers. It sends router advertisement
messages, specified by RFC2461, to a local Ethernet LAN periodically
and when requested by a node sending a router solicitation message.
These messages are required for IPv6 stateless auto-configuration.
Multicast Listener Discovery Snooping (MLD Snooping) is an IPv6
multicast constraining mechanism that runs on Layer 2 devices to
manage and control IPv6 multicast groups. By analyzing received MLD
messages, a Layer 2 device running MLD Snooping establishes
mappings between ports and multicast MAC addresses and forwards
IPv6 multicast data based on these mappings
62
User Manual of VDR-300NU