Planet VDR-300NU User Manual page 103

Object
Select SSID
Network
Authentication
RADIUS Server IP
Address
RADIUS Port
RADIUS Key
WEP Encryption
Encryption
Strength
Current Network
Key
Network Key1/2/3/4
Figure 5-3-8
Description
Select a SSID for configuring the security settings.
Select the 802.1X in the drop-down list.
Enter the IP address of the RADIUS server. RADIUS server is used to
authenticate the hosts on the wireless network.
The port number that the RADIUS server uses. The default port
number is 1812. You may change it according to the server setting.
Set the RADIUS key for accessing the RADIUS server.
You can only select Enabled.
You can set 64-bit or 128-bit key.
The current key that you use.
Set the network key. If it is 128-bit key, you need to enter 13 ASCII
characters or 26 hexadecimal digits. For the 64-bit key, you need to
enter 5 ASCII characters or 10 hexadecimal digits.
103
User Manual of VDR-300NU