Planet VDR-300NU User Manual page 42

Object
PPP Username
PPP Password
PPPoE Service Name
Authentication
Method
Enable Fullcone NAT
Dial on demand
(with idle timeout timer)
Figure 5-2-13
The correct user name provided by your ISP.
The correct password provided by your ISP.
If your ISP provides it to you, please enter it. If not, do not enter any
information.
The value can be AUTO, PAP, CHAP, or MSCHAP. Usually, you
can select AUTO.
NAT is one where all requests from the same internal IP address
and port are mapped to the same external IP address and port.
Furthermore, any external host can send a packet to the internal
host, by sending a packet to the mapped external address.
If this function is enabled, you need to enter the idle timeout time.
Within the preset minutes, if the modem does not detect the flow of
the user continuously, the modem automatically stops the PPPoE
42
User Manual of VDR-300NU
Description