Planet VDR-300NU User Manual page 106

 WPA2 Mode
Object
Select SSID
Network
Authentication
WPA2
Preauthentication
Network Re-auth
Interval
WPA Group Rekey
Interval
RADIUS Server IP
Address
RADIUS Port
RADIUS Key
WPA/WAPI
Encryption
Figure 5-3-11
Description
Select a SSID for configuring the security settings.
Select the WPA2 mode.
Enable or disable pre-authentication.
Set the network re-auth interval.
Setting the interval for renewing key.
Enter the IP address of the RADIUS server. RADIUS server is used to
authenticate the hosts on the wireless network.
The port number that the RADIUS server uses. The default port
number is 1812. You may change it according to the server setting.
Set the RADIUS key for accessing the RADIUS server.
You may select AES, or TKIP+AES.
106
User Manual of VDR-300NU