Audio Indicators; Vibrations; Inserting The Microsd Card And Sim Card; Inserting The Cards - Motorola Omnii User Manual

Audio Indicators

The Omnii supports several audio options, including Bluetooth. The optional rear speaker can be used for
system (Windows) sounds and .wav files. When a rear speaker is absent, those sounds are routed to the front
receiver. The beeper provides a variety of sounds and can be configured to emit a sound to signal a number of
events such as screen taps, notifications, and so on. The volume rocker button is located on the left side of the
hand-held. Information on configuring sounds is detailed in

Vibrations

You can set the Omnii to vibrate when a successful or unsuccessful barcode scan is performed. See
Scan Beep and Bad Scan Beep" on page

Inserting the microSD Card and SIM Card

There are two slots available in the battery compartment — the lower slot is provided for a microSD (Secure
Digital) card, which provides additional non-volatile memory to your Omnii, and the upper slot is for a SIM
(Subscriber Identity Module) card, which allows access to the Voice option, access to the Internet, and so on.
SD Cover

Inserting the Cards

• Switch off the power to the Omnii.
• Remove the battery.
• Use a Phillips screwdriver to remove the SD cover screw. Flip the cover open or remove it.
For a microSD card:
• Slide the microSD card door to the left to unlock it. Flip it open.
• Slide the microSD card into the guides on the SD card door.
• Close the microSD card door, and slide it to the right to lock it.
Getting To Know Your Omnii 2 - 16
"Sound & Notifications" on page
4-91.
4-12.
"Good
microSD Card Slot
SIM Card Slot