Decoded (Intermec Iscp; Decoded (Iscp) Options; Decoded (Iscp) Advanced Options - Motorola Omnii User Manual

When this parameter is enabled, the scanner transmits data from PDF417 and MicroPDF417 barcodes
containing Character Set ECIs, even when the ECI Protocol is disabled.
ECI Decoder
Setting this parameter to on enables the scanner to interpret any Extended Channel Interpretations (ECIs)
supported by the scanner. This parameter has no effect on symbols that were not encoded using ECIs.
If this parameter is set to off and a symbol that was encoded using an ECI escape is scanned, the scanner
transmits the ECI escape followed by the uninterpreted data.
The barcode symbologies for the scanner are listed in the table following.
Code 39
Trioptic Code (disabled)
Code 128
EAN 13
EAN 8
UPC-A
UPC-E
Decoded (HHP)
To configure imagers, please see

Decoded (Intermec ISCP)

• Tap on the Scanner drop-down menu, and choose Decoded (Intermec ISCP).

Decoded (ISCP) Options

Laser On Time
The value assigned to this parameter determines how long the laser will remain on when the scan button or
trigger is pressed.
Double-tapping on this parameter displays a dialog box in which you can enter a value between 1 and 10
seconds.

Decoded (ISCP) Advanced Options

Continuous Scan Mode
Setting this parameter to on keeps the laser on and continuously decoding as long as the scanner button is
pressed and held down.
Minimum Cancel Time
The value assigned to this parameter determines the time delay before the scanner is turned off, once the
scanner trigger or button is released. This gives the scanner a minimum amount of time to complete its current
decode before the scan is cancelled when you quickly trigger on/off.
Decoded (Internal) Barcode Symbologies
UPC/EAN Shared Settings
Code 93 (disabled)
Codabar (disabled)
MSI Plessey (disabled)
Interleaved 2 of 5 (disabled)
Discrete 2 f 5 (disabled)
Gs1 DataBar (disabled)
Appendix B: "Imagers
Scanner Settings C - 7
Applet".