Notifications Tab; Connections Folder - Motorola Omnii User Manual

• Tap on the checkboxes and radio buttons to enable the event(s) that will cause your unit to emit a sound.

Notifications Tab

This tab allows you to choose an event, and for each event, choose the audio notification or sound that the
Omnii will emit for that event. For example, suppose you choose Phone: Incoming call from the Event:
drop-down menu. You can choose a specific Ring type for this event from the drop-down menu, perhaps
Vibrate and ring. In the Ring tone drop-down menu, you can choose the tone or sound of the ring. If your Omnii
vibrates and emits the ring you selected, you will immediately know your hand-held is receiving an incoming
phone call.
• Choose an event from the Events drop-down menu.
• Choose the Ring type and Ring tone for the event you've chosen.
• To test your choice, tap on the arrow below Ring tone. The small square button stops the ring test.

Connections Folder

This folder icon contains the applets you'll need to set up connections using Bluetooth and an 802.11 radio.
• Tap on Start>Settings>Connections folder icon.
Tap here to play
your ring choices
Settings 4 - 13
Tap here to end
the ring test