A home data connection is automatically set up.
•
To connect to the Internet, tap on the Start>Internet Explorer icon.
NOTE
Any application that needs Internet access will establish a packet data con-
nection – for example, e-mail.
Disconnecting from a Network
To disconnect from the network:
•
Tap on the navigation bar at the top of the screen, and then tap on the Phone Settings hotkey. In the
pop-up Phone bubble, tap on Wireless Manager.
•
Tap on the Menu button in the softkey bar at the bottom of the Wireless Manager screen, and choose Dis-
connect Cellular Data.
Advanced Packet Data Configuration
In most cases, when a GSM/GPRS/EDGE radio and SIM are installed in your hand-held, setup is automatic.
Follow the steps outlined under the heading
connection. The information in this section is for advanced setup purposes.
Manual configuration should only be necessary if:
•
One or more parameters in the database are incorrect or a new operator is not yet in the database. (The
database should be corrected for subsequent software releases.)
•
An operator has assigned individual GPRS user names and passwords.
•
A very large site has its own Access Point Name (APN). Such connections must be configured manually.
•
A customer has subscribed for a static IP address. By definition this must be configured manually.
Manually Adding a New Modem Connection
•
Tap on Start>Settings>Connections folder icon. Tap on the Connections icon.
Wireless Wide Area Network (WWAN) G - 5
"Establishing a Packet Data Connection" on page G-3
to make a