4 - 56 Omnii (Windows Embedded Hand-Held 6.5) User Guide
Phone: Data Tab
This screen is used to configure your WWAN data connection to the ISP.
NOTE
For details about setting up your data connection, refer to
Wide Area Network
page
G-3.
Phone: Bands Tab
By default, all frequency bands are enabled. Bands should not be disabled without knowledge about
which bands are used by your network; an incorrect setting will prevent the WWAN modem from finding
the network.
Phone: Diagnostics Tab
(WWAN)",
"Establishing a Packet Data Connection" on
Appendix G: "Wireless