The Devices Tab - Scanning For Bluetooth Devices - Motorola Omnii User Manual

Turning the Bluetooth Radio On
Before pairing a headset or any other Bluetooth device with your Omnii, make certain that the Bluetooth device
power is enabled and that the radio is switched on; it is enabled by default. If, for some reason, it has been
disabled:
• Scroll to the Mode tab.
• Tap in the checkbox next to Turn on Bluetooth.
• Turn your Bluetooth device on and place it within a few feet of your Omnii.
• If needed, set your Bluetooth device to visible (discoverable) so that the hand-held can detect it and estab-
lish a connection.

The Devices Tab - Scanning for Bluetooth Devices

• Scroll to the Device tab.
• To discover and list all Bluetooth devices in range of the Omnii, tap on the Scan button in the softkey bar at
the bottom of the screen.
The Omnii scans for Bluetooth devices within a 10 meter range. Any Bluetooth devices within range appear in
the Bluetooth list box. Any existing devices previously discovered and listed will also be displayed.
Settings 4 - 15