Motorola Omnii User Manual page 181

• Tap on the GPS program port drop-down menu, and choose the communication port that the GPS soft-
ware will use to communicate with the GPS receiver.
NOTE
Your Omnii may automatically detect the GPS receiver that you are using and enter
the settings in the Hardware tab. If not, you'll need to enter this information yourself.
You can find this information in the user manual of the GPS receiver.
Windows Embedded Hand-Held automatically manages access to the GPS receiver. However, some
programs may not work with automatic configuration. If this is the case:
• Tap on the Access tab, and disable Manage GPS automatically (recommended).
You can go to:
http://www.microsoft.com/windowsphone/en-gb/howto/wp7/web/use-maps-to-find-a-place.aspx
if a map-viewing program is not included with your Omnii, and copy the file to your Omnii.
• Tap on the Hardware tab, and set the GPS hardware port to COM2. Set the Baud rate to 4800.
Settings 4 - 67