Disconnecting Without Ending A Session; Ending A Session; Sim Toolkit Ui; Wificonnect A.r.c - Motorola Omnii User Manual

Disconnecting Without Ending a Session

IMPORTANT
• In the Remote Desktop Connection window, tap on Start>Shutdown.
• Tap on Disconnect>OK.

Ending a Session

• In the Terminal Services Client screen, tap on Start>Shutdown.
• Tap on Log Off>OK.

SIM Toolkit UI

SIM Toolkit UI is an ETSI/SMG standard for Value Added Services and e-commerce using GSM phones.
The Omnii operator can, for example, check bank accounts and pay bills using a SIM Toolkit-enabled phone
with an appropriate SIM Toolkit-specific SIM card which will provide much of the information required to
conclude a transaction over GSM.
If this service is available in your organization, the system administrator can provide the setup information for
your service.

WiFiConnect A.R.C.

• Tap on the Start button to access the WiFiConnect A.R.C. icon.
The WiFiConnect A.R.C. utility provides a quick method to configure a device for use on a private network,
primarily for use with Active Remote Configuration (A.R.C.).
WiFiConnect A.R.C. configures the default WiFi interface. The WEP key is set to PsionPsion123. The SSID is
set to Psion. The default interface becomes the active interface. Keep in mind that you must configure the
access point and the hand-held(s) to use the same settings.
Refer to the Active Remote Configuration (A.R.C.) Administrators Guide, PN 8000252, for details about
updating devices on your network. This manual is available at:
http://community.psion.com/knowledge/w/knowledgebase/1189.aspx
These commands are accessed from the Start menu in the Terminal
Services screen used to access the PC's commands. Do NOT use
the Start menu on your Omnii.
Programs 3 - 39