Managing An Existing Connection - Motorola Omnii User Manual

4 - 30 Omnii (Windows Embedded Hand-Held 6.5) User Guide
• In the Name field, type a name for this connection.
• In Host name/IP, type the VPN server name or IP address.
• Tap on the VPN type radio button next to the type of authentication for your Omnii: IPSec/L2TP or PPTP.
Your network administrator will let you know which option applies to your unit.
• Tap on Next.
• Choose the type of authentication in this screen. If you choose A pre-shared key, type the key provided by
your network administrator.
• Tap on Next.
• Type your user name, password and domain name. If a domain name was not provided to you, try the
connection without entering a domain name.
NOTE
Normally, you will not need to change any advanced settings. You will need to make
changes only under only the following circumstances:
- The server to which you are connecting does not dynamically assign addresses, and
TCP/IP settings need to be entered.
- Server DNS or WINS settings need to be changed.
If you need to edit the Advanced settings, refer to
this tab.
• Tap on Finish.
• Launch a program like Internet Explorer to activate the connection. The VPN connection will start
automatically.

Managing an Existing Connection

Once you've defined a connection, a new option appears in the first Connections screen – Manage
existing connections.
Editing a Connection
• Tap on Start>Settings>Connections folder icon. Tap on the Connections icon.
• Tap on Manage existing connections.
• To launch a connection from this screen, press and hold the stylus on the connection you want to activate.
Choose Connect from the pop-up menu.
• To delete a connection, press and hold the stylus on the connection you want to delete. Choose Delete
from the pop-up menu.
Tap here
"Advanced Modem Settings" on page 4-25 for details about