Service Menu (MF Model)
5.3.2 MAINTENANCE MODE MENU
Entering the Maintenance Mode Menu
1.
Turn on the machine.
2.
Press these keys in the following order:
"Clear/Stop", "1", "0", "7" and "Color Start"
3.
"Maintenance Mode" is displayed on the LCD.
Selecting an Item
To select an item, press the "Up" or "Down" key.
Going into the Next Level/ Returning to the Previous Level
To go into the next level of an item, select an item then press the "OK" key.
To return to the previous level of an item, press the "Return" key.
Exiting the Maintenance Mode Menu
To exit the maintenance mode menu, press the "Clear/Stop" or "Return" key until the
"Ready" display appears.
Menu List
Display Info
Model Name
CTL FW Ver.
FAX FW Ver.
FW Ver.
MCTL FW Ver.
PDL FW Ver.
Counter
Printer Counter
G165/G166/G167/G181/G183/G184
CÓPIA NÃO CONTROLADA
Displays the Model Name, Depends on Engine
Firmware Settings
Displays the Firmware Version
Displays the PDL Firmware Version.
(G181 doesn't support this)
Displays the Engine Firmware Version
Displays the PDL Firmware Version.
(G183/184)
Displays the following counters of the printer
engine.
Total Page/ Color Image/ Black Image
5-36
CÓPIA NÃO CONTROLADA
SM