AIO (All In One) Cartridge
6.4.6 DEVELOPMENT MECHANISM
This machine does not use developer, so a TD sensor is not necessary. In each AIO unit,
the toner supply roller [A] supplies toner to the development roller [B]. Electrostatic
attraction generated by the friction between the toner supply roller and development roller
moves toner to the surface of the development roller, and the development blade [C]
makes sure that the layer of toner on the development roller has an even thickness.
The discharge sheet [D] removes development roller bias.
6.4.7 TONER NEAR END AND END DETECTION
Toner Near End
To detect the toner near-end, the machine uses:
Pixel count (memory chip on the AIO)
AIO rotation distance (memory chip on the AIO)
Toner End
To detect toner end the machine uses:
Output from the TM sensor (center)
After near-end, it is estimated that 200 pages (A4, 5% coverage) can be printed until toner
end occurs.
G165/G166/G167/G181/G183/G184
CÓPIA NÃO CONTROLADA
6-26
CÓPIA NÃO CONTROLADA
SM