Ricoh G165 Service Manual page 188

Service Menu (MF Model)
2nd Transfer
Front
2nd Transfer
2nd Transfer
Fuser Temp.
Back
Fuser
Temperature
Horiz. Tray1
Vert.Tray1
Registration
Horiz.Tray2
Vert.Tray2
Horiz.Bypass
G165/G166/G167/G181/G183/G184
CÓPIA NÃO CONTROLADA
Adjusts the transfer roller current, based on the
default value.
[-15 to 15 / 0 (Default) / 1 μA/step]
Adjusts the transfer roller current, based on the
default value.
[-15 to 15 / 0 (Default) / 1 μA/step]
Adjusts the temperature of the fusing unit, based
on the default value.
[-30 to 0 / 0 (Default) / 2°C/step]
Adjusts the horizontal registration for tray 1. If the
machine settings are reset to the factory defaults,
this value does not change.
[-15 to 15 / 0 (Default) / 4 mm/step]
Adjusts the vertical registration for tray 1. If the
machine settings are reset to the factory defaults,
this value does not change.
[-15 to 15 / 0 (Default) / 0.24 mm/step]
Adjusts the horizontal registration for tray 2. If the
machine settings are reset to the factory defaults,
this value does not change.
[-15 to 15 / 0 (Default) / 4 mm/step]
Adjusts the vertical registration for tray 2. If the
machine settings are reset to the factory defaults,
this value does not change.
[-15 to 15 / 0 (Default) / 0.3 mm/step]
Adjusts the horizontal registration for the bypass
tray. If the machine settings are reset to the factory
defaults, this value does not change.
[-15 to 15 / 0 (Default) / 4 mm/step]
5-40
CÓPIA NÃO CONTROLADA
SM